газового контроля
| Телефон: | +7 (495) 517-13-99 |
| Факс: | +7 (495) 661-66-75 |
| E-mail: | sale@prom-bez.ru |
 |
alabai.rus |
Быстрая навигация: Каталог продукции 
Приборы для локализации мест утечек - Течеискатели Расходомеры UDM 500
UDM 500
Серия: SebaKMT
запросить ценуPortable Ultrasonic Flow Measurement of Liquids
Benefits
- Portable device
- Modern non-invasive clamp-on technology
- Usable for all materials
- Exact measurement during low flow conditions
- Installed within 10 minutes
Description
The UDM 500 is a portable ultrasonic measurement device, especially designed for the tough circumstances on site. The small, light weight and modern housing ensures a comfortable working. Due to the non-invasive clamp on technology the UDM 500 can be installed very quickly and without interrupting the network. The ultrasonic method makes the measurement independent from the pipe material. An integrated data logger with a capacity of more than 100.000 values in combination with a powerful Li-ion battery with 14 hours operating time make sure that the device is ready for use all the time and also for long term measurements.
Two addressable flow channels are saving a second main unit. A serial interface enables the UDM 500 to communicate with the computer software where the data from the internal logger will be evaluated and stored.
Different IP 67 or IP 68 transducers ensure suitability for pipe diameters between 6 and 6500 mm and fluid temperatures between -40 °C and +400 °C.
The whole system comes with a robust, watertight (IP 67) transport case for the main unit and its various accessories.
Description
- Multiple I/O opportunities (frequency, pulse, analogue)
- Wall thickness gauge
- Temperature sensor
- IP 68 transducers
Технические характерстики:
| Communication | |
| Interface | R232/USB |
| Transport case | |
| Dimensions | 500 x 400 x 190 mm |
| Current output | |
| Range | 0/4 … 20 mA |
| Accuracy | 0.1% of reading +/- 15 ?A |
| Active output | Rext < 200 Ohm |
| Passive output | Uext = 4 … 16 V, dependent on Rext Rext < 500 Ohm |
| Frequency output | |
| Range | 0 … 5 kHz |
| Open collector | 24 V/4 mA |
| Binary output | |
| Optorelay | 26 V/100 mA |
| Binary output as alarm output - functions | Limit, change of flow directions or error |
| Binary output as pulse output | |
| -Pulse value | 0.01 … 1000 units |
| -Pulse width | 1 … 1000 ms |
| Flow velocity | 0.01 … 25m/s |
| Repeatability | 0.15 % of reading ±0.01 m/s |
| Accuaracy (std) | ±1.6 % of reading ±0.01 m/s |
| Operation time | 14 h |
| Memory | 100.000 values |
| Protection class | IP 65 |
| Display | 2x16 characters, dot matrix, backlit |
| Temperature range | -10 °C … +60 °C |
| Weight | 1.9 kg |
| Communication | RS232/USB |
| Dimensions (case) | 500 x 400 x 190 mm |
| Output | |
| Current | 0/4 … 20 mA |
| Binary | Alarm output Pulse output (0.01 … 1000 units) |
| Frequency | 0 … 5 kHz |
| Input | |
| Temperature | Pt100/1000 (-150 … +560 °C) |
| Current | -20 … +20 mA passive |
| Voltage | 0 … 1 V |
